Man8 ListHOME ||
LIST
- IPXrouted(8)
- IPX Routing Information Protocol daemon
- MAKEDEV(8)
- old script for creating device nodes
- ac(8)
- connect time accounting
- accton(8)
- enable/disable system accounting
- acpiconf(8)
- control ACPI power management
- acpidb(8)
- ACPI DSDT debugger
- acpidump(8)
- dump ACPI tables and ASL
- adding_user(8)
- procedure for adding new users
- adduser(8)
- command for adding new users
- adduser.conf(5)
- adduser(8) configuration file
- adjkerntz(8)
- adjust local time CMOS clock to reflect time zone changes and keep current timezone offset for the kernel
- amd(8)
- automatically mount file systems
- amq(8)
- automounter query tool
- ancontrol(8)
- configure Aironet 4500/4800 devices
- apm(8), zzz(8)
- control the APM BIOS and display its information
- apmd(8)
- Advanced Power Management monitor daemon
- arlcontrol(8)
- configure Aironet Arlan 655 device
- arp(8)
- address resolution display and control
- asf(8)
- add symbol files
- atacontrol(8)
- ATA device driver control program
- atm(8)
- user configuration and display command for HARP ATM interface
- atmarpd(8)
- ATMARP/SCSP interface daemon
- atmconfig(8)
- ATM configuration tool
- atrun(8)
- run jobs queued for later execution
- authpf(8)
- authenticating gateway user shell
- badsect(8)
- create files to contain bad sectors
- bcmfw(8)
- firmware download utility for Broadcom BCM2033 chip based Bluetooth USB devices
- blackhole(4)
- a sysctl(8) MIB for manipulating behaviour in respect of refused TCP or UDP connection attempts
- boot(8)
- system bootstrapping procedures
- boot0cfg(8)
- boot manager installation/configuration utility
- bootparamd(8)
- boot parameter server
- bootpd(8), bootpgw(8)
- Internet Boot Protocol server/gateway
- bootpef(8)
- BOOTP Extension File compiler
- bootptest(8)
- send BOOTP queries and print responses
- bsdlabel(8)
- read and write disk pack label
- bt3cfw(8)
- firmware download utility for 3Com Bluetooth PC card driver
- btxld(8)
- link editor for BTX clients
- burncd(8)
- control the ATAPI CD-R/RW driver
- camcontrol(8)
- CAM control program
- ccdconfig(8)
- configuration utility for the concatenated disk driver
- chat(8)
- Automated conversational script with a modem
- chkgrp(8)
- check the syntax of the group file
- chkprintcap(8)
- check validity of entries in the print spooler database
- chown(8)
- change file owner and group
- chroot(8)
- change root directory
- clri(8)
- clear an inode
- comcontrol(8)
- control a special tty device
- comsat(8)
- biff server
- config(8)
- build system configuration files
- conscontrol(8)
- control physical console devices
- crash(8)
- FreeBSD system failures
- cron(8)
- daemon to execute scheduled commands (Vixie Cron)
- cvsbug(8)
- send problem report (PR) about CVS to a central support site
- daemon(8)
- run detached from the controlling terminal
- dconschat(8)
- user interface to dcons(4)
- devd(8)
- device state change daemon
- devd.conf(5)
- configuration file for devd(8)
- devfs(8)
- DEVFS control
- devinfo(8)
- print information about system device configuration
- dhclient(8)
- Dynamic Host Configuration Protocol Client
- dhclient-script(8)
- DHCP client network configuration script
- digictl(8)
- control Digiboard devices
- diskinfo(8)
- get information about disk device
- diskless(8)
- booting a system over the network
- dmesg(8)
- display the system message buffer
- dnssec-keygen(8)
- DNSSEC key generation tool
- dnssec-signzone(8)
- DNSSEC zone signing tool
- dump(8), rdump(8)
- file system backup
- dumpfs(8)
- dump file system information
- dumpon(8)
- specify a device for crash dumps
- editmap(8)
- query and edit single records in database maps for sendmail
- edquota(8)
- edit user quotas
- extattrctl(8)
- manage UFS1 extended attributes
- faithd(8)
- FAITH IPv6/v4 translator daemon
- fdcontrol(8)
- display and modify floppy disk parameters
- fdisk(8)
- PC slice table maintenance utility
- ffsinfo(8)
- dump all meta information of an existing ufs file system
- fingerd(8)
- remote user information server
- fixmount(8)
- fix remote mount entries
- fore_dnld(8)
- download FORE Systems' microcode into host ATM adapter
- fsck(8)
- file system consistency check and interactive repair
- fsck_ffs(8), fsck_ufs(8)
- file system consistency check and interactive repair
- fsck_msdosfs(8)
- DOS/Windows (FAT) file system consistency checker
- fsdb(8)
- FFS debugging/editing tool
- fsinfo(8)
- co-ordinate site-wide file system information
- fsirand(8)
- randomize inode generation numbers
- ftp-proxy(8)
- Internet File Transfer Protocol proxy server
- ftpd(8)
- Internet File Transfer Protocol server
- fwcontrol(8)
- FireWire control utility
- gbde(8)
- operation and management utility for Geom Based Disk Encryption
- gconcat(8)
- disk concatenation control utility
- geom(8)
- universal control utility for GEOM classes
- getextattr(8), lsextattr(8), rmextattr(8), setextattr(8)
- manipulate extended attributes
- getfmac(8)
- print MAC label for a file system object
- getpmac(8)
- print process-related MAC labels
- getty(8)
- set terminal mode
- ggatec(8)
- GEOM Gate network client and control utility
- ggated(8)
- GEOM Gate network daemon
- ggatel(8)
- GEOM Gate local control utility
- glabel(8)
- disk labelization control utility
- gmirror(8)
- control utility for mirrored devices
- gnop(8)
- control utility for NOP GEOM class
- gpt(8)
- GUID partition table maintenance utility
- graid3(8)
- control utility for RAID3 devices
- growfs(8)
- grow size of an existing ufs file system
- gstat(8)
- print statistics about GEOM disks
- gstripe(8)
- control utility for striped devices
- hccontrol(8)
- HCI configuration utility
- hcsecd(8)
- control link keys and PIN codes for Bluetooth devices
- hcsecd.conf(5)
- hcsecd(8) configuration file
- hcseriald(8)
- supervise serial Bluetooth devices
- hlfsd(8)
- home-link file system daemon
- hprop(8)
- propagate the KDC database
- hpropd(8)
- receive a propagated database
- iasl(8)
- Intel ACPI compiler/decompiler
- ifconfig(8)
- configure network interface parameters
- ifmcstat(8)
- dump multicast group management statistics per interface
- ilmid(8)
- simple ILMI ATM address registration daemon
- inetd(8)
- internet super-server
- init(8)
- process control initialization
- intro(8)
- introduction to system maintenance and operation commands
- iostat(8)
- report I/O statistics
- ip6addrctl(8)
- configure address selection policy for IPv6 and IPv4
- ip6fw(8)
- controlling utility for IPv6 firewall
- ipf(8)
- alters packet filtering lists for IP packet input and output
- ipfs(8)
- saves and restores information for NAT and state tables
- ipfstat(8)
- reports on packet filter statistics and filter list
- ipfw(8)
- IP firewall and traffic shaper control program
- ipmon(8)
- monitors /dev/ipl for logged packets
- isdnd(8)
- isdn4bsd ISDN connection management daemon
- isdndebug(8)
- display and control isdn4bsd kernel variables and statistics
- isdndecode(8)
- isdn4bsd ISDN protocol decode utility
- isdnmonitor(8)
- isdn4bsd / isdnd remote monitoring tool
- isdnphone(8)
- telephone dialing and more for isdn4bsd
- isdntel(8)
- isdn4bsd telephone answering management utility
- isdntelctl(8)
- control isdn4bsd telephone sound format conversion
- isdntrace(8)
- isdn4bsd ISDN protocol trace utility
- ispcvt(8)
- verify if current video driver is pcvt driver
- jail(8)
- imprison process and its descendants
- jexec(8)
- execute a command inside an existing jail
- jls(8)
- list active jails
- kadmin(8)
- Kerberos administration utility
- kadmind(8)
- server for administrative access to Kerberos database
- kdc(8)
- Kerberos 5 server
- kerberos(8)
- introduction to the Kerberos system
- keyserv(8)
- server for storing private encryption keys
- kgmon(8)
- generate a dump of the operating system's profile buffers
- kgzip(8)
- compress a kernel
- kldconfig(8)
- display or modify the kernel module search path
- kldload(8)
- load a file into the kernel
- kldstat(8)
- display status of dynamic kernel linker
- kldunload(8)
- unload a file from the kernel
- kldxref(8)
- generate hints for the kernel loader
- kpasswdd(8)
- Kerberos 5 password changing server
- kstash(8)
- store the KDC master password in a file
- ktrdump(8)
- print kernel ktr trace buffer
- ktutil(8)
- manage Kerberos keytabs
- l2control(8)
- L2CAP configuration utility
- l2ping(8)
- send L2CAP ECHO_REQUEST to remote devices
- lastlogin(8)
- indicate last login time of users
- ldconfig(8)
- configure the shared library cache
- loader(8)
- kernel bootstrapping final stage
- loader.4th(8)
- loader.conf processing tools
- locate.updatedb(8)
- update locate database
- lpc(8)
- line printer control program
- lpd(8)
- line printer spooler daemon
- lptcontrol(8)
- a utility for manipulating the lpt printer driver
- lwresd(8)
- lightweight resolver daemon
- mail.local(8)
- store mail in a mailbox
- mailer.conf(5)
- configuration file for mailwrapper(8)
- mailstats(8)
- display mail statistics
- mailwrapper(8)
- invoke appropriate MTA software based on configuration file
- makekey(8)
- make encrypted keys or passwords
- makemap(8)
- create database maps for sendmail
- makewhatis.local(8), catman.local(8)
- start makewhatis or catman for local file systems
- manctl(8)
- manipulating manual pages
- map-mbone(8)
- multicast connection mapper
- mdconfig(8)
- configure and enable memory disks
- mdmfs(8), mount_mfs(8)
- configure and mount an in-memory file system using the md(4) driver
- memcontrol(8)
- control system cache behaviour with respect to memory
- mergemaster(8)
- merge configuration files, et al during an upgrade
- mixer(8)
- set/display soundcard mixer values
- mk-amd-map(8)
- create database maps for Amd
- mknetid(8)
- generate netid map data
- mknod(8)
- build special file
- mksnap_ffs(8)
- take a file system snapshot
- mld6query(8)
- send multicast listener query
- mlxcontrol(8)
- Mylex DAC-family RAID management utility
- mount(8)
- mount file systems
- mount_cd9660(8)
- mount an ISO-9660 file system
- mount_ext2fs(8)
- mount an ext2fs file system
- mount_msdosfs(8)
- mount an MS-DOS file system
- mount_nfs(8)
- mount NFS file systems
- mount_nfs4(8)
- mount NFSv4 file systems
- mount_ntfs(8)
- mount an NTFS file system
- mount_nullfs(8)
- mount a loopback file system sub-tree; demonstrate the use of a null file system layer
- mount_nwfs(8)
- mount NetWare volume from a NetWare file server
- mount_portalfs(8)
- mount the portal daemon
- mount_smbfs(8)
- mount a shared resource from an SMB file server
- mount_std(8), mount_devfs(8), mount_fdescfs(8), mount_linprocfs(8), mount_procfs(8)
- mount standard file systems
- mount_udf(8)
- mount a UDF file system
- mount_umapfs(8)
- sample file system layer
- mount_unionfs(8)
- mount union file systems
- mountd(8)
- service remote NFS mount requests
- moused(8)
- pass mouse data to the console driver
- mrinfo(8)
- display configuration info from a multicast router
- mrouted(8)
- IP multicast routing daemon
- mtest(8)
- test multicast membership socket operations and ioctls
- mtrace(8)
- print multicast path from a source to a receiver
- mtree(8)
- map a directory hierarchy
- named(8)
- Internet domain name server
- named-checkconf(8)
- named configuration file syntax checking tool
- named-checkzone(8)
- zone file validity checking tool
- named.reconfig(8), named.reload(8)
- reload name server configuration
- natd(8)
- Network Address Translation daemon
- ndiscvt(8)
- convert Windows[rg] NDIS drivers for use with
- ndp(8)
- control/diagnose IPv6 neighbor discovery protocol
- newfs(8)
- construct a new UFS1/UFS2 file system
- newfs_msdos(8)
- construct a new MS-DOS (FAT) file system
- newkey(8)
- create a new key in the publickey database
- newsyslog(8)
- maintain system log files to manageable sizes
- newsyslog.conf(5)
- newsyslog(8) configuration file
- nextboot(8)
- specify an alternate kernel and boot flags for the next reboot
- nfsd(8)
- remote NFS server
- nfsiod(8)
- local NFS asynchronous I/O server
- ngctl(8)
- netgraph control utility
- nghook(8)
- connect to a netgraph(4) node
- nologin(8)
- politely refuse a login
- nos-tun(8)
- implement ``nos'' or ``ka9q'' style IP over IP tunnel
- nsupdate(8)
- Dynamic DNS update utility
- ntpd(8)
- Network Time Protocol (NTP) daemon
- ntpdate(8)
- set the date and time via NTP
- ntpdc(8)
- special NTP query program
- ntpq(8)
- standard NTP query program
- ntptime(8)
- read kernel time variables
- ntptrace(8)
- trace a chain of NTP servers back to the primary source
- pac(8)
- printer/plotter accounting information
- pam_chroot(8)
- Chroot PAM module
- pam_deny(8)
- Deny PAM module
- pam_echo(8)
- Echo PAM module
- pam_exec(8)
- Exec PAM module
- pam_ftpusers(8)
- ftpusers PAM module
- pam_group(8)
- Group PAM module
- pam_guest(8)
- Guest PAM module
- pam_krb5(8)
- Kerberos 5 PAM module
- pam_ksu(8)
- Kerberos 5 SU PAM module
- pam_lastlog(8)
- login accounting PAM module
- pam_login_access(8)
- login.access PAM module
- pam_nologin(8)
- NoLogin PAM module
- pam_opie(8)
- OPIE PAM module
- pam_opieaccess(8)
- OPIEAccess PAM module
- pam_passwdqc(8)
- Password quality-control PAM module
- pam_permit(8)
- Promiscuous PAM module
- pam_radius(8)
- RADIUS authentication PAM module
- pam_rhosts(8)
- Rhosts PAM module
- pam_rootok(8)
- RootOK PAM module
- pam_securetty(8)
- SecureTTY PAM module
- pam_self(8)
- Self PAM module
- pam_ssh(8)
- authentication and session management with SSH private keys
- pam_tacplus(8)
- TACACS+ authentication PAM module
- pam_unix(8)
- UNIX PAM module
- pccard.conf(5)
- pccardd(8) configuration file
- pccardc(8)
- PC-CARD (PCMCIA) management and monitoring tool
- pccardd(8)
- PC-CARD (PCMCIA) management daemon
- pciconf(8)
- diagnostic utility for the PCI bus
- periodic(8)
- run periodic system functions
- pfctl(8)
- control the packet filter (PF) and network address translation (NAT) device
- pflogd(8)
- packet filter logging daemon
- picobsd(8)
- floppy disk based FreeBSD system
- ping(8)
- send ICMP ECHO_REQUEST packets to network hosts
- ping6(8)
- send ICMPv6 ECHO_REQUEST packets to network hosts
- pnpinfo(8)
- reports information about Plug-n-Play ISA devices
- ppp(8)
- Point to Point Protocol (a.k.a. user-ppp)
- pppctl(8)
- PPP control program
- pppd(8)
- Point to Point Protocol daemon
- pppoed(8)
- handle incoming PPP over Ethernet connections
- pppstats(8)
- print PPP statistics
- praliases(8)
- display system mail aliases
- procctl(8)
- clear procfs event flags
- pstat(8), swapinfo(8)
- display system data structures
- pw(8)
- create, remove, modify & display system users and groups
- pwd_mkdb(8)
- generate the password databases
- pxeboot(8)
- Preboot Execution Environment (PXE) bootloader
- quot(8)
- display disk space occupied by each user
- quotacheck(8)
- file system quota consistency checker
- quotaon(8), quotaoff(8)
- turn file system quotas on and off
- rarpd(8)
- reverse ARP daemon
- raycontrol(8)
- configure Raytheon Raylink/Webgear Aviator devices
- rbootd(8)
- HP remote boot server
- rc(8)
- command scripts for auto-reboot and daemon startup
- rc.sendmail(8)
- sendmail(8) startup script
- rc.subr(8)
- functions used by system shell scripts
- rcorder(8)
- print a dependency ordering of interdependent files
- reboot(8), halt(8), fastboot(8), fasthalt(8)
- stopping and restarting the system
- renice(8)
- alter priority of running processes
- repquota(8)
- summarize quotas for a file system
- rescue(8)
- rescue utilities in /rescue
- restore(8), rrestore(8)
- restore files or file systems from backups made with dump
- revnetgroup(8)
- generate reverse netgroup data
- rexecd(8)
- remote execution server
- rfcomm_pppd(8)
- RFCOMM PPP daemon
- rip6query(8)
- RIPng debugging tool
- rlogind(8)
- remote login server
- rmail(8)
- handle remote mail received via uucp
- rmt(8)
- remote magtape protocol module
- rmuser(8)
- remove users from the system
- rndc(8)
- name server control utility
- rndc-confgen(8)
- rndc key generation tool
- route(8)
- manually manipulate the routing tables
- route6d(8)
- RIP6 Routing Daemon
- routed(8), rdisc(8)
- network RIP and router discovery routing daemon
- rpc.lockd(8)
- NFS file locking daemon
- rpc.rquotad(8)
- remote quota server
- rpc.rstatd(8)
- kernel statistics server
- rpc.rusersd(8)
- logged in users server
- rpc.rwalld(8)
- write messages to users currently logged in server
- rpc.sprayd(8)
- spray server
- rpc.statd(8)
- host status monitoring daemon
- rpc.umntall(8)
- notify NFS servers about unmounted NFS file systems
- rpc.yppasswdd(8)
- server for updating NIS passwords
- rpc.ypxfrd(8)
- NIS map transfer server
- rpcbind(8)
- universal addresses to RPC program number mapper
- rpcinfo(8)
- report RPC information
- rrenumd(8)
- router renumbering daemon
- rshd(8)
- remote shell server
- rtadvd(8)
- router advertisement daemon
- rtquery(8)
- query routing daemons for their routing tables
- rtsold(8), rtsol(8)
- router solicitation daemon
- rwhod(8)
- system status server
- sa(8)
- print system accounting statistics
- savecore(8)
- save a core dump of the operating system
- sconfig(8)
- channel configuration utility for Cronyx adapters
- scspd(8)
- SCSP daemon
- sdpcontrol(8), spdcontrol(8)
- SDP query utility
- sdpd(8)
- Bluetooth Service Discovery Protocol daemon
- sendmail(8)
- an electronic mail transport agent
- setfmac(8)
- set MAC label for a file system object
- setfsmac(8)
- set MAC label for a file hierarchy
- setkey(8)
- manually manipulate the IPsec SA/SP database
- setpmac(8)
- run a command with a different MAC process label
- sftp-server(8)
- SFTP server subsystem
- showmount(8)
- show remote nfs mounts on host
- shutdown(8)
- close down the system at a given time
- sicontrol(8)
- Specialix SI/XIO driver configuration and debugging
- slattach(8)
- attach serial lines as network interfaces
- sliplogin(8)
- attach a serial line network interface
- slstat(8)
- report serial line IP statistics
- smbmsg(8)
- send or receive messages over an SMBus
- smrsh(8)
- restricted shell for sendmail
- spkrtest(8)
- test script for the speaker driver
- spppcontrol(8)
- display or set parameters for an sppp interface
- spray(8)
- send many packets to host
- ssh-keysign(8)
- ssh helper program for hostbased authentication
- sshd(8)
- OpenSSH SSH daemon
- sticky(8)
- sticky text and append-only directories
- strfile(8), unstr(8)
- create a random access file for storing strings
- sunlabel(8)
- read and write disk pack label suitable for Sun's OpenBoot PROM
- swapon(8), swapoff(8), swapctl(8)
- specify devices for paging and swapping
- sync(8)
- force completion of pending disk writes (flush cache)
- syncache(4), syncookies(4)
- sysctl(8) MIBs for controlling TCP SYN caching
- sysctl(8)
- get or set kernel state
- sysinstall(8)
- system installation and configuration tool
- syslog.conf(5)
- syslogd(8) configuration file
- syslogd(8)
- log systems messages
- talkd(8)
- remote user communication server
- tcpd(8)
- access control facility for internet services
- tcpdchk(8)
- tcp wrapper configuration checker
- tcpdmatch(8)
- tcp wrapper oracle
- telnetd(8)
- DARPA TELNET protocol server
- tftpd(8)
- Internet Trivial File Transfer Protocol server
- timed(8)
- time server daemon
- timedc(8)
- timed control program
- traceroute(8)
- print the route packets take to network host
- traceroute6(8)
- print the route IPv6 packets will take to a network node
- trpt(8)
- transliterate protocol trace
- tunefs(8)
- tune up an existing file system
- tzsetup(8)
- set local timezone
- ugidfw(8)
- firewall-like access controls for file system objects
- umount(8)
- unmount file systems
- usbd(8)
- supervise USB attach/detach
- usbd.conf(5)
- usbd(8) configuration file
- usbdevs(8)
- show USB devices connected to the system
- verify_krb5_conf(8)
- checks krb5.conf for obvious errors
- vinum(8)
- Logical Volume Manager control program
- vipw(8)
- edit the password file
- vmstat(8)
- report virtual memory statistics
- watch(8)
- snoop on another tty line
- watchdog(8)
- watchdog control program
- watchdogd(8)
- watchdog daemon
- wicontrol(8)
- configure Lucent, Intersil, and Atheros wireless devices
- wire-test(8)
- test your network interfaces and local IP address
- wlconfig(8)
- read/write wavelan config parameters
- yp(8)
- description of the YP/NIS system
- yp_mkdb(8)
- generate the NIS databases
- ypbind(8)
- NIS domain binding daemon
- ypinit(8)
- build and install NIS databases
- yppoll(8)
- ask version of YP map from YP server
- yppush(8)
- force propagation of updated NIS databases
- ypserv(8)
- NIS database server
- ypset(8)
- tell ypbind(8) which YP server process to use
- ypxfr(8)
- transfer NIS database from remote server to local host
- zdump(8)
- timezone dumper
- zic(8)
- timezone compiler
- zzz(8)
- suspend an ACPI or APM system
|
|